BauderTHERMOFOL Stainless Steel Rainwater Outlets

Rainwater outlets

A high performance stainless steel rainwater outlet with factory installed PVC membrane flange. Supplied with an O-ring and a wire ball leaf grill. Supplied with either a light grey or mid grey coloured PVC membrane flange.

Bauder outlets are sized to show the internal diameter of the spigot. For information on non-standard sizes and refurbishment applications, please contact Bauder Technical Department.

This product does not require a Declaration of Conformity (DoC) or Declaration of Performance (DoP).

Technical data sheet

Product information

Characteristic Unit Value
Stainless steel base plate mm 250 x 250
PVC membrane flange mm 350 x 350
Stainless steel spigot length mm 400
Thermofol stainless steel outlet DN 70 mm mm 70 - To suit 75mm-97mm rainwater pipe
Thermofol stainless steel outlet DN 100 mm mm 100 - To suit 110mm-128mm rainwater pipe
Thermofol stainless steel outlet DN 150 mm mm 150 - To suit 160mm-178mm rainwater pipe
Flow rate litres/sec Thermofol stainless steel outlet DN70 mm: 2.98*
Thermofol stainless steel outlet DN100 mm: 3.94*
Thermofol stainless steel outlet DN150 mm: 6.76*
*Flow rate performance data using a 35mm head of water (including leaf grille), based upon requirements of BS EN 12056:3:2000.

All further technical information is stated on the data sheet.