Hard Landscaping - Bedded Paving
Creating low maintenance accessible areas such as walkways, access roads and terrace spaces with container planting set atop the paving or decking for an intensive green roof finish.
Below is an overview of the key features and benefits of Bauder Total Roof System, but if you have any questions, don’t hesitate to get in touch.
Hard landscaping for moderate loadings
When to specify...
This system is ideal for hard landscaping intensive green roof applications such as decking and paving where the anticipated loading is moderate.
| 1 Paving |
|
| 2 DSE 20 infilled with sand cement screed bedding |
Protection layer to prevent mechanical damage to the waterproofing system. |
| 3 FSM 600 protection layer |
Protection layer to prevent mechanical damage to the waterproofing system. |
| 4 PE foil separation layer |
Separation layer between the waterproofing and green roof components. |
| 5 Bauder waterproofing |
Shown here with Plant E root resistant, SBS modified bitumen membrane reinforced with 250g/m² recycled spunbond polyester. |
Key features
- Designed with a compressive strength of up to 1000kN/m2
- Creates low maintenance accessible spaces
- Versatile visual finish
- Supports planter held vegetation
Benefits
- Assists in maximising the building's potential
- Planters can be relocated to suit visual design
- Low maintenance
Approvals, certification and guarantee
- Comprehensive range of guarantees for this system
- Landscaping elements manufactured to meet FLL guidelines
Environmental credentials
- DSE 20 is made from recyclable HDPE
Installation and maintenance
The quality and experience of the installing operative is paramount to ensuring a successful project. Bauder Approved Contractors are the only people fully trained and certified to install our products. They provide the necessary experience that our exceptional guarantee demands.
Go to maintenance advice ►
Hard landscaping for heavily trafficked areas
When to specify...
When the roof structure allows, hard landscaping can be designed to allow for vehicular access and the associated dynamic higher weight loading.
| 1 Paving, decking or road surface |
|
| 2 Crushed gravel base 30-50mm |
|
| 3 Filter fleece |
Polypropylene fleece to prevent substrate fines from entering the drainage element. |
| 4 DSE 60 water retention and drainage layer infilled with Bauder Mineral Drain |
Multi-functional water storage and drainage layer, usually infilled with Mineral Drain.
|
| 5 FSM 1100 protection layer |
Protection layer to prevent mechanical damage to the waterproofing system. |
| 6 PE foil separation layer |
Separation layer between the waterproofing and green roof components. |
| 5 Bauder waterproofing |
Shown here with Plant E root resistant, SBS modified bitumen membrane reinforced with 250g/m² recycled spunbond polyester. |
Key features
- Withstands loads above 1000Kg/m2
- Ideal construction base for permeable or bedded surfaces including roadways and paving
- Creates low maintenance accessible spaces
- Versatile visual finishes
- Planter held vegetation as well as full complement of landscaping
Benefits
- Assists in maximising the building's potential
- If planters are utilised this creates a moveable scheme
- Low maintenance
Approvals, certification and guarantee
- Comprehensive range of guarantees for this system
- Landscaping elements manufactured to meet FLL guidelines.
Environmental credentials
- DSE 60 is made from recyclable HPDE
Installation and maintenance
The quality and experience of the installing operative is paramount to ensuring a successful project. Bauder Approved Contractors are the only people fully trained and certified to install our products. They provide the necessary experience that our exceptional guarantee demands.
Go to maintenance advice ►
Downloads