BauderJFRI (300) Inverted Insulation

BauderJFRI (300) Inverted Insulation is an environmentally friendly, high performance rigid expanded polystyrene (EPS) insulation, which is very lightweight and has a higher compressive strength than the (200) grade. The product is rebated on all four sides to ensure thermal continuity. It is CFC and HCFC free, with a Global warming potential less than 5Kg CO2. This product is for use with inverted (protected membrane) roof constructions and can be laid directly onto Bauder Hot Melt and Bitumen Based Waterproofing Membranes. Contact Bauder for advice relating to other membrane types.

Intended Use

Use in conjunction with BauderJFRI Vapour Permeable Membrane Layer (WFRL) prior to installing paving, decking, ballast or green roof. Use in conjunction with BauderJFRI HP Plus 60mm Upstand Board to exposed vertical upstands.

Product datasheet Declaration of performance

Technical Data
DOWNLOADS

BauderJFRI (300) Inverted Insulation Product Datasheet »
BauderJFRI HP Upstand Insulation Product Datasheet »

 DoP »
Length 1215mm (including 15 rebate)
Width 1215mm (including 15 rebate)
Board coverage 1.44m²
Single thickness (in 5mm increments) 50 to 240mm
Nominal weight 40kg/m3
Declared thermal conductivity
Design thermal conductivity		 0.033W/mK
0.038W/mK
Design Load compressive strength
Design loads for long term compressive creep		 0.30N/mm² with 10% nominal compression
0.09N/mm² with 2% compression
Arrange a meeting