BauderTEC DBR 06 Air & Vapour Control Layer

BauderTEC DBR 06 is a 0.6 mm thick, technically advanced, self-adhesive, elastomeric, reinforced bitumen air and vapour control layer, featuring an aluminium foil facing for vapour impermeability. The product is thinner than other Bauder air and vapour control layers and is therefore lightweight. If this product is being used in a fully bonded system, a Bauder Self Adhesive Primer will be required. The product benefits from cleaner, safer and faster installation than traditional torch applied membranes

Product DatasheetDoP

 

Technical Data

DOWNLOADS Product Datasheet » DoP »
Roll size 1.25 x 32m
Surface finish Top: Aluminium foil
Bottom: Release film over self-adhesive bitumen
Weight 0.6Kg/m²
Thickness 0.6mm
Reinforcement Aluminium foil & 50g/m2 polyester
Tensile strength (EN 12311-1) Length ≥ 950N/50mm
Diagonal ≥ 750N/50mm
Elongation at break (EN 12311-1) Length ≥ 4%
Diagonal ≥ 4%
Cold bending (EN 1109) -40°C