Bauder Bitumen Parapet Outlet DN100

Home
Products
Bauder Bitumen Parapet Outlet DN100

Bauder Bitumen Parapet Outlet DN100

Ancillaries

A stainless steel bitumen parapet outlet for roof drainage systems. Factory bonded membrane flange attached to the outlet allows for ease of installation.

For use with Bauder bituminous waterproofing membranes when used through walls or parapets to external drainage via a hopper head and/or downpipe. The product is designed to be used in warm, cold, and inverted roof scenarios. To be used in conjunction with the parapet outlet leaf guard.

Product details

Characteristic	Unit	Value
Base plate	mm	230 (width) x 175 (vertical) x 70 (horizontal)
Aperture	mm	100
External diameter of spigot	mm	110
Bitumen membrane flange	mm	430 (width) x 280 (vertical) x 180 (horizontal)
Stainless steel spigot length	mm	600
Weight	kg	2.53 (2.80 including leaf guard)
Flow rate performance	litres/sec	1.06*

*Flow rate performance data using a 35 mm head of water (including leaf guard), based upon requirements of BS EN 12056:3:2000. To utilise a higher flow rate, the forming of a sump in front of the parapet outlet can aid with this, increasing the head of water, meaning a possible reduction in the number of parapet outlet units required. For bespoke drainage calculation performance data, please contact Bauder Limited.

All further technical information is stated on the data sheet.
This product does not require a Declaration of Conformity (DoC) or Declaration of Performance (DoP).