Refurbishment of Lanchester School saved £24,500 in heating costs and reduced CO2 emissions by approximately 74 tonnes per year. 
The Bauder Group, has achieved a first in environmental certification for two of its green roof products; ahead of any other roofing company in the UK. 
An innovative housing development by Metropolitan Housing Trust has been awarded a CABE Building for Life Silver Standard... 
If we don’t have the skills to do it, common sense tells us that a job is not only going to be difficult but also risky and costly. 
150 Cheapside is a new-build office development in the centre of London, offering 182,740 sq ft of office space with a roof terrace 
York Hospital remains operational during roofing works to refurbish the 2000sq metre failing roof above the Oncology Ward. The roof... 
Tony Russell, Deputy Director of Estates at University Campus Suffolk (UCS) in Ipswich knows all too well about the challenges of making a green building work. 
A unique fastening system enables the support elements to be installed very quickly, easily and securely without any roof penetrations. 
In recent years, changes to various sections of the Building Regulations seem to have conspired to make it very difficult to design and install flat roof waterproofing to upstands 
Baudertherm Stripes
BauderTHERM 'stripes' is our innovative single-layer system designed to provide a practical, fast and cost effective solution to the problem of refurbishing existing flat roofs.
When a roof covering is reaching the end of its serviceable life, but is still essentially waterproof, overlaying the existing system is a sensible way of considerably enhancing the life expectancy of the roof providing that the thermal properties of the roof still comply with current Part L of the UK Building Regulations (Part J in Scotland).
KEY FEATURES
- 5.2mm thick, torch bonded elastomeric bitumen membrane
- 250g/m² spunbond polyester reinforcement to give a tensile strength of 1000N/50mm.
- Life expectancy in excess of 15 years.
- Stable in extreme weather conditions for temperatures ranging from -30°C to +105°C when tested to the following European Standards; Cold bending test (EN 1109) and heat stability test (EN 1110).
- Guaranteed for 12 years.
